Skip to content
ReviewersPH Free Practice Tests

General Exams (Plum Sanization Db) – Page 6

#101. The maximum spacing of horizontal hanger for 1/2 inch CPVC.
A 2 feet
B 3 feet
C 4 feet
D 5 feet
Answer: 3 feet
#102. What is the allowable distance between the trap arm and the vent if the fixture has a trap arm diameter of 32 mm?
A 0.76 m
B 1.52 m
C 0.51 m
D 1.07 m
Answer: 0.76 m
#103. What force would be exerted on the gate of a closed 6” diameter gate valve if the water pressure acting on it measured 46 Psi.
A 1300.62 lbs
B 5202.48 lbs
C 1656 lbs
D 276 lbs
Answer: 1300.62 lbs
#104. In plumbing system a bridge means a ___________________________.
A pipe under the bridge
B meeting point of the two subsystems
C trap valve
D connector
Answer: meeting point of the two subsystems
#105. An artificial rod installed in a water heater to protect tank from corrosion.
A insulation rod
B dip tube
C anode rod
D alpha rod
Answer: anode rod
#106. Which term is not applicable in water purification?
A Dilution
B Infiltration
C Aeration
D Sedimentation
Answer: Dilution
#107. The birth of the plumbing profession in the Philippines was traced back to
A 14th century
B 15th century
C 16th century
D 17th century
Answer: 17th century
Help your batchmates find the official result
Messenger